X-Wing Tournament Report : La boite à Chimère (Rouen) - part1

A bit late in my reporting! Last month I played in a small tournament at La Boite à Chimère in Rouen. The shop is  nice, with lots of parking and really awesome tables painted by Hert:

You can click on the following images for bigger pictures:

     

 

I decided to bring my usual swarm but with a twist : I replaced 2 Ties with a buzzsaw shuttle:
6 Academies 72
OGP, Fire Control System,  Gunner 28

I won't do a turn by turn report of all 4 games but only give you the highlights:

Game 1 :

Crevette and a pretty atypical list with :
Shadow squadron pilot, advanced cloacking device +?
Bounty hunter
Dark curse
Alpha squadron pilot

Deployment:

I deployed my ties in 2 groups ready to cross the first asteroid on my left, and deployed the shuttle in front of his interceptor. He then deployed the rest of his ships.

Pedal to the metal I closed the distance as fast as possible, taking down the alpha squadron on turn 2 with I think a lucky shot with the shuttle and some help from the lead Ties.

Turn 3 was brutal for him :

The shadow squadron got caught in the furball at range 1 of the shuttle and with the added firepower of a couple of ties exploded:

After that the game turned to hunt the Bounty Hunter.

His list was not really optimized, but against my low PS swarm a shadow squadron PS5 is not really a problem, so it's actually not that bad. He lost the game when the Phantom entered the furball.

The buzzsaw was nice in this game, mostly for its firepower at all range even when blocked.

Game 2 : 

Yann is the owner of the shop and runs a pretty tight ship.

He was playing: 

Etahn A'Baht, advanced sensors, R2D2

5 bandit squadron

A list that I was really interested to face as it's crit generation could pose a big problem to my Ties.

Turn 1, at PS2:

The only thing I knew was that I did not want to get caught byt the Z95 at range 1 while in the sights of Etahn so I spread my swarm in a big line to force some choices on his part.

He decided to go for the shuttle with Etahn so my Ties were free to run havoc in his lines. The shuttle lost some shields, but with 6 ties + shuttle to his 5 Z firepower I managed to destroy 3 Z95 while only loosing 1 Tie ( blocking with damaged Ties allowed me to spread his firepower, so it was not that loopsided  in damage dealt but it left me with 6 guns to his 3.

I then mopped up the rest of his forces:

Here I think Yann made a mistake and should have kept Etahn on the Ties, allowing him to accumulate crits and reduce my firepower faster. However, I did roll above average with my defense dice so it was really hard for his 2 attack ships to land hits and I'm not sure it would have turned the game around but it would have been probably closer.

Expect part 2 soon.

Time to reload,
Ica

X-Wing Showcase : Imperial Lambda Shuttle Repaint

I don't know, ...  fly casual.

The best ride to infiltrate a heavily guarded shield generator, the lambda shuttle is one of the most iconic ships of the original trilogy. I really enjoyed painting it.

With such large surfaces compared to the other ships in the game I had to increase the color modulation on each panel to keep it interesting across the table.

I went for a slightly non canon paint job, adding small red areas to the wings and giving a red tint to the cockpit.

No leds in this one : after trying for half an hour to pry it open, I convinced myself that it wasn't worth it...

I used a new idea for the ball joint with a ring magnet and a ball magnet, expect a tutorial soon!

I kept the folding wings for ease of transport:

 Hope you like it!

Last month I played a bit with the layout of the blog and I added a new page : http://rule37-ica.blogspot.com/p/hobby-links.html that you can access from the top toolbar with a few hobby ressources and links (tutorials and repaint blogs or threads). If you like those I can add more!

Time to reload,
Ica

Follow blog updates on twitter :  https://twitter.com/intent/user?screen_name=Icareane37
or on facebook : https://www.facebook.com/rule37.ica

X-Wing tutorial : Repainting the Millenium Falcon

Would it help if I got out and pushed?

Starting from this line, I knew that to properly represent the Millenium Falcon I would need to push my weathering techniques to the max and get away from my confort zone.

Here you can see the various paints I used:

Main hull:

- pro-color white

- atronomican grey

- ceramic white

- chaos black

- shadow grey

- scab red

- codex grey

Cockpit :

- dwarf flesh

- Fluorescent orange

Weathering:

- mars black (oil)

- burnt umber (oil)

- raw sienna (oil)

The first step was to block out the main colors. On a black undercoat, I airbrushed pro-color white at an angle to keep some shadows, insisting on raised areas. Then I took my trusty raphael 1 brush and painted the colored pannels in scab red and shadow grey. The access holes and engines received a coat of chaos black.

Top:

Bottom:

Next came the weathering. Dipping a torned bit of foam in white and various shades of grey I painted a pattern of small dots on the hull:

The second step was the oil wash. The model was varnished with satin varnish then I prepared my usual mix of black oil paint + lighter fluid and applied generously:

Using Q-Tips damp with lighter fluid, I then removed the excess wash on the panels.
Sorry for the lack of pictures here.

I then highlighted the top edges of all panels with ceramic white:

Then I threw caution out the window, and started experimenting with oils directly on the model.

I first mixed a bit of umber and black to create a dark brown color that I applied lightly with a brush to the area close to the engines (use a special brush for that folks, you do not want to mix oil into your regular acrylic brushes!). You can be a bit sloppy here as the next step will cover mistakes. You should use a dabbing motion more than brush stroke.

Using a lighter fluid damp Q-tip, then I went over the oils, gently fading the edges:

I did the same on the bottom edge of the open access panels. Then painted the canopy with dwarf flesh fading to black toward the front.
At that moment the model was a bit too blue and lacked the characteristic rusty spots of the Falcon so I decided to try some oil filters. I applied raw sienna in small dots to the hull at random points:

Then gently worked them in a general rust stain shape with a dry Q-Tip:

If the rust stain is too intense, you can go over it with a lighter fluid damp q-tip to blend the edges.
That's when I decided it was good enough! Letting the oils dry over night, I varnished again the model with matt varnish.

To give bit more contrast to the canopy I finished by blending fluorescent orange to the rear areas then varnished it with gloss varnish.

I then posted the paintjob online and got quite a few positive returns, but with several saying that the weathering was not pushed enough, that the Falcon was too clean.

Challenge accepted!

First using a mix of chaos black and scorched brown I added lots of water stains, starting from the top of the panels and small details and going toward the edge of the ship. Then using the previous oil technique, I added a dark stain around the central round panel.

Now it really looks the part!

Hope this helps, don't hesitate to ask if you have questions in the comments.

Time to reload,
Ica

3D printing : the future of miniature gaming?

So I just finished painting 2 Jedi Interceptors at 1/270th scale  from Shapeways designed by Mel_Miniatures.

http://www.shapeways.com/model/984898/interceptor-lledi-1-270.html?materialId=61

Is this the future of miniature gaming?

Maybe.

However right now it is no replacement for plastic/resin models.

This model in Frosted Ultra Detail set me back around 11€, 

which is a bit steep considering the level of detail and it's only 20mm long.

Here is a picture in it's raw state:

And with a black undercoat, to get a better view:

The 2 interceptors on the right have been cleaned before priming while the 2 on the left and the 2 Tie Droids have been primed directly. Pay attention to the small lines on the hull and the grain of the back of the cockpit.

Closeup of the underneath before cleaning:

Cleaned with a white coat, to get a different view: 

So basically it is a great way to get the basic shape of a model, but the level of details (the resolution so to speak) is not there yet compared to a plastic/resin model, even in the frosted ultra detail which is the best level of details you can get from Shapeways.

However I bet it would be a great way to create a main body for detailing in order to create a master for casting.

As is you can get great results with a bit of work, but as you can see most of the details on the model where free handed and that's not everyone cup of tea.

Time to reload,
Ica

X-Wing Showcase : Anakin Jedi Interceptor

So what I told you was true. From a certain point of view.

Following Obiwan craft, I painted Anakin ETA-2 interceptor from Revenge of the Sith. It sports as expected R2D2 in the droid slot.

As the close ups of Obiwan fighter revealed a grain texture to some panels, I tried to weather the craft differently to hide/decrease the apparent roughness.

Here is a group shot of my 3 latest ships, the Millenium Falcon and the 2 jedi Interceptors:

Time to reload,
Ica